do-it-yourself house – Construction

Image : http://www.flickr.com

Can you handle the challenge to to build a homemade diy solar hot water heater? Stand still and say yes! I’m on your back on this battle. Surely, we could build a durable personalized hot water system. We both have our great helper up in the sky. You don’t need to whistle hard to call her. She follows you throughout daylight. Is it daylight only? Yes, because she needs to charge up and gives the stage to the moon. Our greatest helper is no other than our mother sun. Look up and see her rays waving hi to you.

So, let’s get the work done. Let’s start the challenge by gathering needed materials for our project. Breathe deeply for our journey towards competence will now start.

The following are the needed materials:

“Remember: things need not be expensive and brand new for it to be fully functional.”

- Old or used water heater
– Lumber
– Copper items for sampling
– Pegboard masonite
– Insulators (plastic foam)
– Used or old aluminum storm windows
* Expensive glass panels could be use depending on your budget
– Nails
– Old plastic pipe (black)
– Relief valve
– Connection tubing

How to build a solar hot water heater?

As you can see we are trying to simplify the materials needed since one of our main goals is to save and cut off our budget. We could get advantage of our old tubing and other things mentioned above but be sure all of which are functional. Old doesn’t mean thrash rather its usage pass the test of time and still it could be use.

All materials are set for the construction of improvised and personalized solar hot water heater. Now, let’s go to the procedures in making the unit.

Here are the instructions for the construction of the unit:

Step 1: Construct a hot box. In this case, a wooden box will be made surrounded with glass, and then will get some portion of the aluminum storm window to capture the solar heat.

Step 2: Put up a manifold inside the box. With the use of copper sheet collector and used water pipes, you’ll get the manifold done. At this moment, the solar heat collected is now ready to warm the water.

Step 3: Position the old water heater that serves as storage tank above the box and outlet of the newly made manifold. Connect it. This will allow transfer of warm water into the tank and the cooler water will be delivered into the collector to be warmed.

Stop! Safety Precautions of how to construct personalized solar hot water heater:

Check for leaks prior to usage of the unit. Empty the system completely prior to plan of getting the system leak proof

Step 4: Lastly, apply a black coating or paint to your collector sheet as well as to the manifold. Protect your wooden box by using the oil-based coating. Expose the personalized water heater 45 degrees angle in relation to the sun and attached the water tank.

Now, you prove yourself that you could build a homemade diy solar hot water heater.

http://diyhomedepot.idatablog.com/

Image : http://www.flickr.com

It can sound complicated with the plethora of equipment needed. But if we actually think about it, the equipment is pretty easy to obtain. You will need basics such as your measuring tape, hammer and drill. A few dozen galvanized bolts and screws to hold the structure together, with the braces, joists and posts. You will also need to use concrete bags and gravel, thinner and stain to paint your deck with.

Home Design Software – First, take advantage of the latest technology, and utilize one of the home design software packages that are available. You have choices that can help with the materials and equipment needed, in the calculation of costs and the designs and even local building codes.

Material – Once the design of your deck is set, you’ll need to consider materials. Good options are redwoods, cedar or pine in pressure treated sizes like 2 x 4’s, 2 x 6’s and 4 x 4. There are also several newer options. There are many composite materials on the market today that resemble wood in appearance and feel. Such materials will seem more costly in the beginning but it can give years to your deck’s life span and is worth the initial outlay. In addition, they do not twist out of shape unlike wood and you need not stain it.

Foundation – The basics for a lasting deck. If you are uncertain about how to go about preparing the ground and pouring concrete, or making vertical anchors, you can look for professional help for this stage. Other than this, you should be able to tackle all other aspects of deck building with minimal assistance.

Pier Spacing – Check the building codes in your area to find out the recommended support pier spacing. Make your support distances equal to or less than the 8 or 12 foot length that most lumber is available in. It will be simpler for you as it reduces the number of cuts needed.

Sealing – Usually there are ledger boards that lay up against the house to support the beams (joists) under the walking surface. Sometimes they have a Z-shaped flashing that lays on the ledger board top and side surfaces, up against the house.

Metal flashing can twist out of shape in due time as temperature fluctuates even when it was set up properly. Do cover up screw holes to lessen the chances of moisture causing damage.

Space the ledger board away from the wall using metal washers. So, you might not have to remove siding and it can reduce moisture that can result in corrosion and mold.

Use Screws and Bolts – Instead of nails, use screws and bolts wherever you can. Almost all nails will eventually rust, and stain tends to not stick to them. Although they will also rust over time, screws will not become loose like most nails will.

Using screws, however, is more time consuming than simply pounding in nails. You can make your job faster utilizing a power screwdriver attachment on the hand drill.

No matter what methods you use to build your deck, careful design and attention to detail will always give you the best results. This will help you save hundreds in repair bills later on.

http://diyhomedepot.anyhow5.com/ http://diyhomedepot.ndesignsblog.com/

Image : http://www.flickr.com

It seems, energy costs are constantly on the move and every look at their budgets and how they can save money. One option that you have not considered, is more on free, renewable energy, such as from the sun – solar power. In this article we will use 7 of the DIY solar panels study:

1. $ 1000, you can save on energy costs. Once built, you can your solar power system free energy to your home for years tocome.

2. The DIY solar panels can be made with good quality solar cells purchased outside of eBay. These can be purchased at very low prices and thus not cost you the solar world.

3. Homemade solar power plants will need only build basic skills. After the materials, it is only a matter of following simple step-by-step instructions from one of the many guides available on the Internet.

4th DIY solar panel construction can be a fun andSatisfying project. Imagine how rewarding it will feel when you materialize the fruits of your hard work in the form of small monthly electric bill to see.

5. Protect yourself against rising energy prices. In today's volatile economy and markets, no one can predict what will happen to the price of fossil fuels wholesale. With your own solar panel system, you can be safe in the knowledge that you are never charged for the use of the sun.

6. Increase the price of your home. IfYou can encourage buyers how much you're saving energy costs due to your solar system to show, you will certainly add considerable value to your house price.

7. You can even earn money and save money. In many states, the energy companies to give you money if you can produce more energy than you consume. This is because of your solar system can be set to unused electricity to the grid in return for use by other consumers.

These are just some of theAdvantages of building your own DIY solar panels. Many people are already realizing these benefits and save hundreds of their energy costs. If you find money from your monthly expenses and to help protect the environment there, then more solar power is definitely in the right way.

http://diyhome.ugetblog.com/ http://diyhouse.jaideespace.com/